What type of cylinder is the SDA cylinder? What is the difference between the SDA cylinder and the SC cylinder?

What type of cylinder is the SDA cylinder?

sdaUltra-thin cylinder, 80 cylinder inner diameter is 80mm, 15 stroke is 15mm, S with magnetic ring (Magnetic induction), generally speaking, S means a magnetic switch, and 2S means 2 magnetic switches.

SDA cylinder is thin and light: while maintaining the existing movement accuracy and product service life, its full length is only 1/2-1/3 of a general cylinder. It is thin and light;Easy to install: It uses a buried installation method and does not require any accessories to save space;Easy to maintain: It is designed with a simple assembly method to facilitate assembly, disassembly and maintenance;Magnetic control Simplicity: Assembly slots are reserved around the body, making the installation, fixation and position adjustment of the magnetic switch extremely simple;High accuracy and no impact sound: The front cover is lengthened internally to increase guidance and improve accuracy, and rubber buffers are placed front and rear. , to eliminate the sound of the piston hitting the front and rear end covers.

sda cylinderUse working medium: Dry clean air filtered by water removal and containing oil mist. Medium and ambient temperature: Special water removal treatment. Thin cylinders should be stored in a ventilated and dry warehouse to prevent moisture and rust. Before installation, it should be tested under no-load conditions, and it can be installed only after it is normal. Select the installation method according to the usage conditions, and pay attention to the following during installation:

A: For earring installation and intermediate shaft pin installation, their acting forces should be in the same plane.

B: When the flange is installed, its force is on the same axis as the support center. The connection between the flange and the support seat should allow the flange surface to bear the force without causing the flange to bear the force. Its fixed gong nails bear tensile force.

C: The cylinder piston rod is not allowed to bear eccentric or lateral loads. Extra long stroke cylinders should be supported or guided. Before the cylinder is connected to the pipeline, the internal contents of the pipeline must be cleared. Prevent debris and dust from entering the cylinder cavity. If necessary, the buffer wire core can be adjusted to adjust the buffering effect to avoid collision between the piston and the cylinder head and damage to the machine parts. During use, fasteners should be checked frequently to prevent loosening. The diameter of the cylinder inlet and exhaust pipe joints is generally adapted to the cylinder bore. According to the usage conditions, the user installs a one-way throttle valve in the inlet and exhaust pipes to adjust the cylinder piston rod.

The difference between sda cylinder and sc cylinder

The difference between sda cylinder and sc cylinder is that SC is a standard cylinder, SDA is a thin cylinder, QGBZ is a heavy-duty cylinder, single piston, double-acting, adjustable buffer cylinder on both sides, CylinderAppearance The installation dimensions comply with ISO6430 international standards. The main materials are made of high-quality carbon structural steel, which is strong and durable and suitable for working under harsh conditions.

The above isWhat type of cylinder is the SDA cylinder? What is the difference between the SDA cylinder and the SC cylinder? Content introduction, want to know more Relevant information can be viewed by logging on to Diancifawww.diancifa.cc.