Moving Image
SF Express nationwide free shipping, large items delivered to your door, daily shipment volume 50,000 pieces, corporate legal person, individual registration click hereLogin registrationLog out

The difference between sda cylinder and sdas, installation and use of sda cylinder

Author:RinckSource:https://www.diancifa.cc/Update time:2024-11-02 15:51:46 Read:


The difference between sda cylinder and sdas



SDA small pneumatic thin cylinder, SDAS with magnetic booster cylinder.







Installation and use of sda cylinder



The working medium of the thin cylinder is: dry and clean air that has been filtered by water removal and contains oil mist. Medium and ambient temperature: Special water removal treatment. Thin cylinders should be stored in a ventilated and dry warehouse to prevent moisture and rust. Before installation, it should be tested under no-load conditions, and it can be installed only after it is normal.








The difference between sda cylinder and sdas, sda Cylinder installation and use







sda cylinderSelect the installation method according to the usage conditions. Pay attention to the following during installation:



A. For earring installation and intermediate shaft pin installation, their acting forces should be in the same plane.



B. When the flange is installed, its acting force is on the same axis as the support center. The connection between the flange and the support base should allow the flange surface to bear the acting force without causing the Its fixed gong nails bear tensile force.



C. The cylinder piston rod is not allowed to bear eccentric load or lateral load. Extra long stroke cylinders should be supported or guided. Before the cylinder is connected to the pipeline, the internal contents of the pipeline must be cleared. Prevent debris and dust from entering the cylinder cavity. If necessary, the buffer wire core can be adjusted to adjust the buffering effect to avoid collision between the piston and the cylinder head and damage to the machine parts.







During use, fasteners should be checked frequently to prevent loosening. CylinderThe diameter of the intake and exhaust pipe joints is generally adapted to the bore diameter of the cylinder. According to the usage conditions, the user installs a one-way throttle valve in the intake and exhaust pipes to adjust the rotation of the cylinder piston rod.







The above issda cylinder follow Differences between sdas, installation and use of sda cylinder Content introduction, if you want to know more related information, please log in to Sunway Pneumaticwww.diancifa. cc view.

Loading...