What equipment uses cylinders? What are the uses of cylinders in machinery?

What equipment uses cylinders?






Pneumatic components are components that perform work through the force generated by the pressure or expansion of gases, that is, components that convert the elastic energy of compressed air into kinetic energy. Such as cylinders, pneumatic motors, steam engines, etc. Pneumatic components are a form of power transmission and an energy conversion device that use gas pressure to transmit energy.





The cylinder is a cylindrical metal part that guides the piston in linear reciprocating motion. The working fluid converts thermal energy into mechanical energy through expansion in the engine cylinder;the gas is compressed by the piston in the compressor cylinder to increase the pressure. The casings of turbines, rotary piston engines, etc. are often also called "cylinders." Application areas of cylinders: printing (tension control), semiconductors (spot welding machines, chip grinding), automation control, robots, etc.





As long as an air compressor is used, it must use gas, such as using a cylinder to feed materials, using a cylinder to clamp, etc. In other words, as long as a cylinder is used, a valve body must be used. There are manual valves and electromagnetic valves. The electromagnetic valve is as simple as the solenoid valve. Add another sentence, whatever you want, you can do it with a cylinder and a solenoid valve.














What are the uses of cylinders in machinery?






The cylinder is a relatively small device, but its uses are very wide. In the field of machinery, many of its shadows can be found. It can play different roles in different situations according to different needs. Let’s take a look at its role in machinery. What are the uses in .





1. The cylinder serves as a pressing mechanism
First of all, the cylinder is a very ideal stamping equipment with excellent working performance. Its appearance has quickly replaced the clumsy stamping equipment of the past. The production of many products cannot be separated from its assistance and support, and it also provides manufacturers with Saved a lot of money. For example, it can be used in the manufacturing of automobile parts, including the pressing of guide sleeve bushings, the pressing of lower ring rubber bushings, etc. When used as a press-in equipment, it is necessary to confirm the press-in method (up and down or left and right) and press-in load grid in advance, then select the appropriate cylinder diameter and stroke according to the needs, and then confirm the correct installation method according to the installation position.






2. The cylinder serves as a guiding mechanism
Judging from the work content alone, it is actually a very simple repetitive task. However, if the piston rod is equipped with a suitable guide rod, and then cooperates with the electrical control of the equipment, the guide rod can be automatically guided. . In this case, it can be used in the valve plate assembly process of car shock absorbers. In the vertical direction, the valve plate stacking groove is below, the guide cylinder is above it, and the valve plate pushing mechanism is in the horizontal direction. Then, in cooperation with the automatic conveying direction of the valve plate stacking slot, the purpose of automatic valve plate assembly is achieved. As a guide function, because it is not loaded, you can choose a small-bore cylinder as needed and use a fixed installation method. Since the guide needs to be centered, we can install a floating joint between the piston rod and the guide rod. .






3. The cylinder serves as a clamping mechanism
The processes involved in industrial production are complicated, and each processing step is very important for the product. For example, for the work of tightening electric nuts, the screw part must be fixed and centered. At this time, the cylinder can be used to complete the clamping operation in the horizontal direction, and only one cylinder needs to be installed on the left and right sides of the clamped workpiece.







The above is what kind of equipment uses cylinders? What are the uses of cylinders in machinery? Content introduction, if you want to know more relevant information, please log in to www.diancifa.cc to view the Dianwei Pneumatic.