Characteristics of normally open solenoid valve, installation and operation methods of normally open solenoid valve

Normally open electromagnetic Valve characteristics

The solenoid valve is closed when the coil is energized, and the solenoid valve is opened after the coil is deenergized. The solenoid valve in the pipeline is open for a long time. When it is closed occasionally, a normally open solenoid valve should be selected. Note: Another situation is that the solenoid valve is powered on for a long time. The control module can be used to prevent the normally closed solenoid valve coil from overheating and burning. Another situation is that the solenoid valve is open and closed for a long time. A bistable solenoid valve can be used. That is, the solenoid valve is powered off after being powered on. At this time, the solenoid valve remains open. When it is closed, the solenoid valve needs to be powered on again. closure.

Normally open solenoid valve installation and operation method< /span>

1. First, ensure that the normally open solenoid valve is installed The previous internal and pipe cleaning can be used to clean the pipes, and a filter needs to be installed in front of the valve.

2. The second step is the installation of the normally open solenoid valve Regarding the direction issue, firstly, the arrow mark on the valve body represents the flow direction of the medium;secondly, most solenoid valve products can only be installed vertically. If due to limitations of the working environment and space, you can choose solenoid valve products that can be installed arbitrarily.

3. Pipes that require normally open solenoid valves Install the bracket to fix the solenoid valve and pipe to avoid damage caused by long-term vibrationSolenoid valve failure problem.

4. Front and rear pipeline installation of normally open solenoid valve Pressure gauge to monitor the working status of the normally open solenoid valve at any time.

5. It should be installed next to the normally open solenoid valve. The circuit is set to facilitate maintenance and daily cleaning when the normally open solenoid valve fails.

6. After the normally open solenoid valve is installed, It is necessary to conduct a movement test, and only after it is correct can it be officially put into work.

The above isNormally open solenoid valve characteristics, normally open solenoid valve installation and operation methods Content introduction, if you want For more information, please log in to www.diancifa.cc.