How to adjust the rotation angle of the rotary cylinder, structure diagram of the rotary cylinder

How to adjust the rotation angle of the rotary cylinder

How to operate and adjust the angle of cylinder rotation, inRotary cylinder Problems with various angles often arise during use, such as how to control 90 or 180 degreesRotary cylinderRotate to the set angle. Another example is whether the angle of rotation can be controlled through a program and how to adjust it. What is the angle you want? Let’s analyze it in detail below.



GeneralRotary cylinderThe rotation angle can be adjusted internally, such as plus or minus 15 degrees, plus or minus 90 degrees, etc. The specific adjustable angle depends on the model. Among them, the gear-type angle cylinders are all adjustable, while the blade-type cylinders need to be carefully selected, as some models are not adjustable.

1. If you choose a directly adjustable onerotary cylinder, can directly adjust the screw on the rotary cylinder .



2. A linear cylinder can be used to indirectly control the angle. Two cylinders can achieve two angle controls.



3. The specific implementation method is: set a Cylinder, when the cylinder moves linearly, the mechanical component can rotate at a certain angle around the center of the circle. Installing two cylinders in different directions can achieve two angles of rotation.

4. This method has been used to control the rotary ironing machine before, which requires two cylinders to work alternately.

Rotary cylinder structure diagram

The above isWhat about the rotary cylinder? Adjust the rotation angle, rotary cylinder structure diagramContent introduction, if you want to know more related information, please log in to Sunway Pneumaticwww.diancifa .cc view.