What are the symptoms if the cylinder solenoid valve is broken?

Many people may not know it very well< strong>CylinderSolenoid valve, in fact, it is composed ofelectromagnetic coil and magnetic core, usually including one or more< span style="font-size:16px;">The valve body with a single hole is used to be a basic component of industrial machinery automation, so span>Cylinder solenoid valveWhat will happen if it is broken? You might as welland learn about it together with the editor.

Cylinder Solenoid ValveWhat will happen if it breaks?

1. Need to install cylinder solenoid valveDuring the working process, the pneumatic valve does not work, which means that the direction of the air source has not changed.

2.Cylinder solenoid valveWhen working, if the movement is bad or sometimes bad, it is mainly because the magnetic force of the coil has become smaller.

3. After the coil is energized and a metal conductor is inserted into the coil, the suction force is obviously insufficient.

Cylinder Solenoid ValveCommon faults and solutions

The device cannot be powered on. The troubleshooting method is very simple when encountering such a fault. Replace the fixed thread directly. Just follow it up.

2. Cylinder solenoid valveIf the coil is burned out, you can use a multimeter to test it. -size:16px;">Remove the wiring of the cylinder solenoid valve, if it is onIf there is a problem, then the coil of the cylinder solenoid valve is burned out.

3. When the coil is damp, it will also cause insulation magnetic leakage. If the spring is too large, or the spring is too stiff, the reaction force will be greater, which will cause If the suction power is insufficient and the spring is damaged, pay attention to the current when handling it, or replace it with a new spring.

4. Cylinder solenoid valveStuck, if the internal mechanical parts are brought indust or there is too little lubricant, it will get stuck. In this case, the solution is to insert the steel wire from the head into the hole and let the spring Bounce back, or directly disassemble thecylinderSolenoid valve, remove the internal valve coreDown, clean it with engine oil, and then reinstall it to solve the problem.

The above isCylinder solenoid valve What will happen if it breaks?Content introduction, if you want to know more related information, please log in to Shenwei Pneumaticwww.diancifa.cc .