Installation method of mini cylinder
1. Free installation method refers to using the threads in the cylinder body to screw into the machine body for fixed installation without using installation accessories;or using CylinderThreads on the outside of the cylinder body , use nuts to fix the cylinder to the machine;you can also use screws to fix it to the machine through the screw holes of the end cover.
2. The tripod-type installation method, represented by LB, refers to using an L-shaped installation tripod to match the screw hole on the front end cover and use screws to install and fix the tripod. It can withstand large overturning moment and can be used in situations where the direction of load movement is consistent with the axis of the piston rod.
3. Flange type installation can be divided into front flange type and rear flange type. The front flange type uses flanges and screws to fix the cylinder at the front end cover. The flange type refers to installing a flange on the rear end cover and fixing it with screws. It is also suitable for situations where the direction of load movement is consistent with the axis of the piston rod.
How to disassemble the mini cylinder
The end caps on both sides are threaded together with the cylinder tube connection, Mini cylinderAfter the basic threads are tightened, sealing glue will be applied.
As shown below after disassembly:
The above ismini cylinder Installation method, how to disassemble the mini cylinderContent introduction, if you want to know more related information, please log in to Sunway Pneumaticwww.diancifa .cc view.
WhatsApp: +8615857777578