How to use the rotary clamping cylinder, how to use the rotary clamping cylinder

How to use the rotary clamping cylinder, how to use the rotary clamping cylinder

The stroke of the rotary clamping cylinder is composed of two parts: the rotation stroke and the clamping stroke. It is recommended to use thisCylinder, the clamping action must occur during the clamping stroke. Some netizens have given feedback and hope to introduce more information about this kind of cylinder.

1. Cylinder principle: Please see the structural principle diagram below. The piston rod of this cylinder has an upper opening. There are guide rail grooves, and the movement of the cylinder's clamping stroke and rotation stroke is controlled by the guide pin. Because of the view, only the straight part of the guide rail groove in the picture is drawn. On the piston rod close to the piston side, the guide rail groove with a rotating arrangement is not drawn.

2. Precautions during use: If the piston rod of the cylinder is subjected to rotational force, it will cause malfunction. , the rotation accuracy will not be reduced, so the following items must be observed when using it.

1. The cylinder must be installed vertically and cannot be used horizontally. (When used in the horizontal direction, please use the MK2T series.)

2. Work in the rotation direction, including clamping, limiters, etc., is absolutely not allowed.

3. Clamping cannot be performed during the rotation stroke, that is, the clamping action must be performed within the clamping stroke (linear stroke) range.

4. The clamping surface of the workpiece must be in line with the The axis of the cylinder is vertical, that is, the inclined surface cannot be clamped.

The above isRotary clamping How to use the cylinder, how to use the rotary clamping cylinderContent introduction, if you want to know more related information, please log in to Sunway Pneumaticwww View .diancifa.cc.