The current development of the rotary cylinder market has brought us many surprises. The classification of rotary cylinders is very wide, mainly based on their application in different mechanical equipment. Rotary cylinders are One of them has a rather special application. Only after technical installation can it be put into normal work. Let's learn about it belowRotating cylinderPlease install and use it correctly.
It is very important to choose the appropriate rotary cylinder according to your own needs. Be clear about what model you need. When ordering from the manufacturer, you can take the following measures according to the order quantity: In the form of spot checks, conduct spot checks on some goods. Try to choose some manufacturers with reliable reputation, big brands, and good quality. Do not buy low-quality products for cheap. If they are used in industrial production, it will delay the entire production line.
The rotating cylinder must be properly handled before use. First, we need to check whether the rotating cylinder is damaged and whether there is looseness in the bolt connection. This will greatly Reduces installation trouble.
During the installation process, the piston rod of the rotating cylinder cannot be overloaded with external forces, nor can it be deviated in direction, and must be consistent with the axis of the piston.
There are various forms of installation, but no matter what kind of installation method, the angle rotation cylinder is guaranteed not to deform. Deformed rotary cylinders cannot be used. The connection cannot be in the form of welding, which cannot guarantee the long-term use of the cylinder.
When installing the angle rotating cylinder horizontally, pay attention to the horizontal angle and choose an angle that is more convenient for inspection and maintenance. The front, middle and rear parts of the piston rod must be balanced.
Before the use of the rotating cylinder, one of the main steps is adjustment. The first task is to adjust the speed. The speed control valve cannot float too much and must be fine-tuned. At the beginning, it is not easy for the control valve to open too large. There must be a buffering process to allow the inertial energy of the piston to be fully absorbed.
After the rotary cylinder is installed, it will be put into normal work. The work of the rotating cylinder is mainly a process of converting pressure into power. Within the operating working pressure range, try 2 to 3 times without pressure first to ensure that the rotating cylinder can work normally before applying pressure.
The buffer belt is a commonly used auxiliary device in the angular rotation cylinder. It should be used before work. Adjust the adjustment strap to a lower resistance position. CylinderAfter putting into normal work, increase the resistance of the buffer until it is adjusted to the appropriate position.
After all procedures are completed, lubricating oil must be added to the bolts and connections, which can buffer resistance, reduce friction, and extend the life of the machine.
The above isRotary cylinder installation and usage methodsIntroduction, if you want to know more related information, please log in to Shenwei Pneumaticwww.diancifa.cc to view.
WhatsApp: +8615857777578