How to determine the cylinder model?

How to determine the model of the cylinder?

Question: Now I only know that I need a cylinder, and the stroke of the cylinder should be between 100mm-120mm or larger. The force exerted should be 10-15 kilograms! What model should I choose for this cylinder? How to choose? What should the model be?

Based on the data you provided, through calculation and review of relevant information, I recommend the following cylinder models:

FESTO cylinder:

Order number: 536233;

AND-20-150-A(I)-P-A;

This model cylinder bore is 20 , stroke 150 (this series of cylinders has a stroke of 1-500 optional) if the stroke is too long, it can be shortened;

The propulsion force is 188N, the return force is 144N;

Tape straps at both ends are not allowed Adjust the buffer;

Tracheal thread interface M5;

Installation thread M5;

A external threaded pull rod, I internal threaded pull rod (M8);

Magnetic ring switch can be installed;

FESTO products are relatively expensive, the "Mercedes-Benz and BMW" of the pneumatic industry, but they are very durable. Our company specializes in The fully automatic assembly lines that produce gas vehicle relays are all FESTO products, which are easy to use and rarely malfunction. If RMB allows, it is recommended to use them. You can also use Japanese SMC, CKD, Koganei, and Taiwan Airtac. Don’t buy fake SMC products. If you consider using SMC, I will teach you a few tricks to distinguish the real ones from the fake ones.