What does sc cylinder mean? How to install sc cylinder?

What does sc cylinder mean?


SC is a tie rod type standard type, SCD is a tie rod type biaxial type, SCJ is a tie rod type biaxial adjustable type, SCT is a tie rod type multi-position model, large cylinder type cylinder, including SC, SG, SU, SE and other series.


Standard cylinders SU, SC and SI are all commonly used standard cylinders. The action types are double-action;the buffer type is adjustable buffer, and the buffer adjustment is smooth;the installation and fixation forms are also the same.





The differences between SC cylinder, SI cylinder and SU cylinder are as follows:


SC product features: lubrication-free
Using oil-containing bearings, the piston rod does not need to be lubricated.
buffering
In addition to the fixed buffer, the cylinder terminal also has an adjustable buffer to ensure smooth and impact-free cylinder reversal.
High temperature resistance
High temperature resistant sealing materials can be used to enable the cylinder to work normally under high temperature conditions of 150 degrees Celsius (can be customized for you as needed)

SI cylinder:
The position of the piston rod of the insulated cylinder between the welding gun and the machine body is adjustable. But it can prevent detours.
The head of the cylinder piston rod has a Morse No. 3 tapered hole, which makes the installation of the welding gun easier.
The welding gun has a large pressing force, which is twice the output of a single cylinder, ensuring the quality of the welding process.

SU is a locking cylinder:
The SC and SU cylinders are the same, both have tie rods. The difference is that the SC tie rods are exposed, while the profile of the SU cylinder can hide the tie rods. The SI and SU have built-in tie rods, but the end caps look a little different.





How to install sc cylinder? Do you know all these five installation methods?


There are many ways to install the cylinder. According to whether the cylinder body can move after the cylinder is installed, it is briefly divided into fixed type and swing type. Generally, the same type of cylinder has multiple installation forms. Taking the SC standard cylinder as an example, there are free type, tripod type, flange type, earring type and center swing type.


1. The free installation method refers to using the threads in the cylinder body to screw into the machine body for fixed installation without using installation accessories;or using the threads outside the cylinder body to fix the cylinder to the machine with nuts;it can also be done through the end. The screw holes of the cover are used to fix the machine to the machine with screws.






2. The tripod-type installation method, represented by LB, refers to using an L-shaped installation tripod to match the screw holes on the front end cover and use screws to install and fix it. The installation tripod can withstand large overturning moments and can be used for loads. When the direction of movement is consistent with the axis of the piston rod.






3. Flange type installation can be divided into front flange type and rear flange type. The front flange type uses flanges and screws to fix the cylinder at the front end cover, and the rear flange type refers to the installation method at the rear end cover. The flange is fixed with screws, which is also suitable for situations where the direction of load movement is consistent with the axis of the piston rod.





4. The earring type installation method is divided into single-ear type and double-ear type. It refers to using screws to fix the cylinder end cover and the earring-type mounting accessories at the rear end cover of the SC series standard cylinder. The vertical direction of the piston rod axis has a For cylinders with pin holes, the load and cylinder can swing around the pin. During rapid action, the larger the swing angle, the greater the lateral load the piston rod bears.






5. The mid-swing type installation method is to install the TC mid-swing in the middle of the cylinder to complete the installation and fixation of the cylinder. The cylinder in this installation method can swing around the middle trunnion and is suitable for long cylinders.





The above content is about what does sc cylinder mean and how to install sc cylinder? Introduction, if you would like to know more about this issue, or have other technical consultation or selection issues, Sunway Pneumatic has a mature technical team and complete pre-sales and after-sales services. Your consultation is always welcome.