AppCustomerCommentsContactGuide
My page Order listRegistration
Moving Image
SF Express nationwide free shipping, large items delivered to your door, daily shipment volume 50,000 pieces, corporate legal person, individual registration click hereLogin registrationLog out

Knowledge Classification

√ Recently Viewed Products

    Snway PneumaticProduct KnowledgeValve knowledge

    Structure and working principle of membrane cylinder

    Author:RinckSource:https://www.diancifa.cc/Update time:2024-11-14 14:55:46 Read:
    The picture below shows the working principle diagram of the diaphragmcylinder. There are two types of diaphragms: flat diaphragms and disc-shaped diaphragms. They are generally made of fabric rubber, steel sheets or phosphor bronze sheets, with a thickness of 5~6mm (1~2mm thick diaphragms are useful).



    The function of the diaphragm cylinder shown in the figure below is similar to that of a spring-return piston single-acting cylinder. When working, the diaphragm pushes the piston rod to move under the action of compressed air. Its advantages are: simple and compact structure, small size, light weight, good sealing, not easy to leak, simple processing, low cost, no wearing parts, easy maintenance, etc., DiaphragmCylinderSuitable for short travel occasions. The disadvantage is that the stroke is short, generally no more than 50mm. The stroke of a flat diaphragm is shorter, about 1/10 of its diameter.


    Structure and working principle of membrane cylinder



    1-Cylinder 2-Diaphragm 3-Diaphragm 4-Piston rod


    Previous:Structure and working principle of combination cylinder with valveNext:Vane swing cylinder and working principle
    Loading...