AppCustomerCommentsContactGuide
My page Order listRegistration
Moving Image
SF Express nationwide free shipping, large items delivered to your door, daily shipment volume 50,000 pieces, corporate legal person, individual registration click hereLogin registrationLog out

Knowledge Classification

√ Recently Viewed Products

    Snway PneumaticProduct KnowledgeValve knowledge

    Vane swing cylinder and working principle

    Author:RinckSource:https://www.diancifa.cc/Update time:2024-11-13 22:22:10 Read:
    The structural principle of single-vane swing cylinder is shown in the figure. It is composed of blade shaft rotor (i.e. output shaft), stator, cylinder block and front and rear end covers. The stator and cylinder are fixed together, and the blades and rotor are connected together. There are two air paths on the stator. When the left path takes in air, the right path exhausts. The compressed air pushes the blades to drive the rotor to swing clockwise. Otherwise, make a counterclockwise swing.



    Blade swingCylinderIt is small in size and lightest in weight, but requires high manufacturing precision, difficult to seal, large leakage, and the dynamic seal contact area is large, and the friction of the seal The resistance loss is large and the output efficiency is low, less than 80%. Therefore, its application is limited, and it is generally only used in situations where the installation position is restricted, such as the rotation of fixtures, opening and closing of valves, and table rotation.


    vane swing cylinder and working principle




    1-Blade 2-Rotor 3-Stator 4-Cylinder

    Previous:Structure and working principle of membrane cylinderNext:Structure and working principle of rack and pinion swing cylinder
    Loading...