Steam solenoid valve is a type of product that is widely used in the solenoid valve series. Its application environment and medium are steam, and steam solenoid valves are There are two types, one is the boiler steam solenoid valve, and the other is the steam solenoid valve from the thermal power plant. The two types of steam solenoid valve products are suitable for different media. When selecting a model, users should make a selection based on the actual working environment requirements and the model performance of the steam solenoid valve. During the actual use of steam solenoid valve products, we often encounter some emergency fault problems, such as the steam solenoid valve not working properly, Steam solenoid valve cannot be opened and other problems. In this article, Lidian Valve Industry has summarized several common problems Several common causes of failure that cause the steam solenoid valve to fail to open, as well as the corresponding methods to deal with the failure. The specific content is as follows:
1. First check whether the coil is burned out. If so, disassemble it. Check the steam solenoid valve, and depending on the degree of damage to the coil, decide to repair or replace the steam solenoid valve coil with a new one.
2. Check whether the spring of the steam solenoid valve is broken. It can be replaced or replaced as appropriate. repair.
3. If there are particulate impurities in the steam solenoid valve, it will hinder the internal operation of the steam solenoid valve. Affect the operation of the valve. The steam solenoid valve can be disassembled for cleaning.
4. If the opening pressure is too high or too small, the steam solenoid valve will not work. Please adjust it according to the situation. Just repair and replace.
5. Poor sealing of the steam solenoid valve itself will also cause the solenoid valve to fail to work. At this time Just check to see if there are any air leaks and repair them.
6. Is the spring on the internal valve core of the steam solenoid valve stuck? No, Solenoid valveCan't work either. Another possibility is that the moving iron core and the pipe are too tight, and the iron core gets stuck when it is turned on.
Check whether the steam solenoid valve cannot be opened due to the above conditions, and repair or replace it according to the suggestions of our Lidian Valve Industry. I believe the fault will be eliminated. Next If there are other similar problems next time, I think you can solve them easily.
WhatsApp: +8615857777578