Airtac double-acting cylinder characteristics

AirTAC double-acting cylinder characteristics

Double piston rod double acting cylinder. Double piston rod cylinder has two types: cylinder fixed and piston rod fixed.
　

When the cylinder is fixed, the load it carries (such as a workbench) is integrated with the two piston rods of the cylinder, and the compressed air enters the two cavities of the cylinder in turn (one chamber is filled with air and the other

Exhaust from one chamber), the piston rod drives the worktable to move left and right, and the movement range of the worktable is equal to 3 times of its effective stroke s. The installation takes up a lot of space and is generally used

On small devices.
　

When the piston rod is fixed, for the convenience of pipeline connection, the piston rod is made hollow, the cylinder and the load (workbench) are integrated, and the compressed air flows from the hollow piston

The left or right end of the rod enters the two cavities of the cylinder, causing the cylinder to drive the worktable to move to the left or left. The movement range of the worktable is twice its effective stroke s.

Suitable for medium and large equipment.
　

Double piston rod cylinder because the diameters of the piston rods at both ends are equal, the force-bearing areas on both sides of the piston are equal. When the input pressure and flow rate are the same, its reciprocating motion

The output force and speed are equal.