Refrigeration solenoid valve

Refrigeration solenoid valve is suitable for systems with no pressure difference or low pressure, such as the pressure is lower than 0.8MPa and the temperature is not higher than 180℃, various mixed media pipelines, such as papermaking, printing and dyeing, clothing equipment, HVAC, electroplating coating, drying Equipment, mechanical equipment and air treatment and other industries, it is the first choice product for automation control engineering, project transformation and equipment matching. Redesigned, using spherical transition and small resistance to improve circulation capacity.
Refrigeration solenoid valve is an automation basic component used to control the direction of fluid and is an actuator. It is usually used on mechanical controls and industrial valves to control the direction of the medium, thereby controlling the valve switch. There is a closed cavity in the solenoid valve, with through holes at different positions. Each hole leads to a different oil pipe. There is a valve in the middle of the cavity, and two electromagnets on both sides. Whichever side of the magnet coil is energized will be attracted to the valve body. Wherever it goes, the movement of the valve body is controlled to block or leak different oil drain holes. The oil inlet hole is normally open, and the hydraulic oil will enter the different oil drain pipes, and then push the cylinder through the pressure of the oil. The piston drives the piston rod, which drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.