TCLJ Three-axis adjustable cylinder

1. Implement JIS standards;
2. Two guide rods made of special bearing steel, guided by linear bearings or brass bearings, have high resistance to torsion and lateral load;★Note: Steel ball linear bearings: suitable for cylinder push and lift actions, or with high requirements Precision and high load-bearing capacity, especially suitable for occasions requiring low friction motion;Brass sliding bearing: suitable for cylinder braking and other radial load-resistant occasions, compared with ordinary brake cylinders, it is 2 times better The above are resistant to lateral impact forces and have greater torsional stiffness.
3. The drive unit and guide unit are designed in the same body, no additional accessories are required, minimal space requirements, and the air inlet connection is optional, making installation more convenient;
4. There are two precise positioning holes on the bottom surface of the body, the rear end surface of the body and the fixing plate (see the PA hole and XX hole in the outline drawing), providing higher precision positioning installation for occasions where higher precision is required;
5. Four sensor grooves on the body provide multiple installation methods for sensors;
6. The special design of the body provides various installation and fixing types:
Category: Adjustable Cylinder, Brand: Airtac, Series: TCLJ