Further Narrow Down
Sub-category
- Standard cylinder (67)
- clamping cylinder (17)
- stop cylinder (6)
- special cylinder (2)
- Rodless cylinder (7)
- block cylinder (4)
- Rotating cylinder (1)
- Thin cylinder (11)
- Swing cylinder (19)
- finger cylinder (23)
- Slide cylinder (17)
- Needle cylinder (1)
- Cylinder accessories (2)
- Flat cylinder (15)
- mini cylinder (1)
- Guide cylinder (12)
- Compact cylinder (93)
cylinder
The cylinder is composed of a cylinder barrel, an end cover, a piston, a piston rod and a seal;the cylinder refers to a cylindrical metal part that guides the piston to perform linear reciprocating motion in the cylinder. The air expands in the engine cylinder to convert thermal energy into mechanical energy;the gas is compressed by the piston in the compressor cylinder to increase the pressure.
Standard cylinder(67)
clamping cylinder(17)
stop cylinder(6)
special cylinder(2)
Rodless cylinder(7)
block cylinder(4)
Rotating cylinder(1)
Thin cylinder(11)
Swing cylinder(19)
finger cylinder(23)
Slide cylinder(17)
Needle cylinder(1)
Cylinder accessories(2)
Flat cylinder(15)
mini cylinder(1)
Guide cylinder(12)
Compact cylinder(93)
Category:cylinderBrand:FESTO
$342.86Including Tax$387.43
1. Sturdy and precise movement device with extremely high torque resistance and long service life
2. Reliable gripping through precisely ground sliding guides
3. Sliding guide rail
4. The opening angle of each gripper finger can be freely adjusted up to 90°, thus optimizing cycle time
5. Can be used as a double-acting and single-acting gripper
6. Single acting type or with gripping force support, normally closed (NC)
7. Suitable for external and internal crawling
8. Various adaptation methods on the drive
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1792830 | HGRT-50-A-G2 | G1/8 | $966.22 | $1091.83 | One-year return guarantee | |
| 1792820 | HGRT-16-A-G2 | M3 | $453.29 | $512.22 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1792819 | HGDS-PP-20-YSRT-A-B | M5 | $1196.53 | $1352.08 | One-year return guarantee | |
| 1792811 | HGDS-PP-12-P1-A-B | M5 | $954.86 | $1078.99 | One-year return guarantee |
1. High torque capacity due to the side support of the air gripper chuck
2. Self-centering type
3. Internal fixed throttling
4. Maximum repeatability
5. Sliding guide rail
6. Can be used as a double-acting and single-acting gripper
7. Single acting type or with gripping support, normally closed (NC)
8. Various adaptation methods on the drive
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1792810 | DHRS-40-A-NC | G1/8 | $551.69 | $623.41 | One-year return guarantee | |
| 1792802 | DHRS-10-A | M3 | $224.54 | $253.73 | One-year return guarantee |
1. High torque capacity due to the side support of the air gripper chuck
2. Can be used as double-acting or single-acting air claw
3. Single-acting type with gripping force support, normally open (NO)
4. Suitable for external and internal crawling
5. Various adaptation methods on the drive
6. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
1. Grab parts with undefined positions and shapes
2. Shape adaptive capture of products with different geometric shapes
3. Shape adaptive grabbing, with suction cup effect
4. Gently grab fragile products of various sizes
5. The RA1 derivative has a robot interface and can be quickly integrated into a lightweight robot environment.
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1792790 | DHEF-20-A-RA1 | M5 | $514.29 | $581.15 | One-year return guarantee | |
| 1792789 | DHEF-20-A | M5 | $342.86 | $387.43 | One-year return guarantee |
1. Grab 11 specifications with diameters from 8 to 85 mm
2. Movement direction: bellows upward or downward
3. Different bellows materials: EPDM or silicone
4. Side air connection including middle hole, or from the center above
5. Optimize process flow and improve quality: avoid scratches on workpieces
6. Additional security: can be sensed by proximity sensor or sensor
7. Used to gently grab precision workpieces from inside
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity |
|---|---|---|---|---|---|
| 1792788 | DHEB-63-E-U-S-P | $366.36 | $413.99 | One-year return guarantee | |
| 1792701 | DHEB-8-E-D-E-L | $117.74 | $133.05 | One-year return guarantee |
1. Synchronous movement of clamps
2. The clamp guide rail achieves dust-proof effect by sealing air
3. Powerful version available
4. Equipped with T-slot guide rails
5. Can be used as a double-acting and single-acting gripper
6. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
7. Suitable as external and internal air gripper
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1780281 | HGDT-63-A-G2 | G1/8 | $1026.12 | $1159.52 | One-year return guarantee | |
| 1780252 | HGDT-25-A | M5 | $653.09 | $737.99 | One-year return guarantee |
1. Precise gripping with central motion despite large torque load
2. Completely sealed, so suitable for very harsh environments
3. 5 specifications with stroke/chuck less than 12 mm
4. Can be used as a double-acting and single-acting gripper
5. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1780251 | HGDD-80-A-G2 | G1/8 | $1286.59 | $1453.85 | One-year return guarantee | |
| 1780237 | HGDD-35-A | M5 | $795.94 | $899.41 | One-year return guarantee |
1. High load-bearing capacity and precise air gripper chuck T-slot guide rail
2. It occupies a small space but has a large gripping force.
3. Maximum repeatability
4. Can be used as a double-acting and single-acting gripper
5. Single acting type or with gripping force support, normally closed (NC)
6. Suitable for external and internal crawling
7. Various adaptation methods on the drive
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1780236 | DHDS-50-A-NC | G1/8 | $629.01 | $710.78 | One-year return guarantee | |
| 1780231 | DHDS-16-A | M3 | $357.50 | $403.98 | One-year return guarantee |
1. Micro holder: compact and lightweight structure
2. Due to the externally adjustable air claw fingers, it can grasp in all directions
3. Single-action gripper, optional normally open (NO) or normally closed (NC) jaws
4. Suitable for external and internal crawling
5. Adopt clamping flange, flange mounting parts, and Z-stroke compensation fixation methods
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1780230 | HGWM-12-EZ-G8 | M3 | $153.70 | $173.68 | One-year return guarantee | |
| 1780219 | HGWM-08-EO-G6 | M3 | $156.84 | $177.23 | One-year return guarantee |
1. High torque capacity due to the side support of the air gripper chuck
2. Maximum repeatability
3. Can be used as double-acting or single-acting air gripper
4. Single-acting type with gripping force support, normally open (NO)
5. Suitable for external and internal crawling
6. Various adaptation methods on the drive
7. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1780218 | DHWS-40-A-NC | G1/8 | $392.71 | $443.76 | One-year return guarantee | |
| 1780210 | DHWS-10-A | M3 | $166.78 | $188.46 | One-year return guarantee |
1. High torque capacity due to the side support of the air gripper chuck
2. Maximum repeatability
3. Can be used as double-acting or single-acting air gripper
4. Single-acting type with gripping force support, normally open (NO)
5. Suitable for external and internal crawling
6. Various adaptation methods on the drive
7. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
1. High performance and flexible
2. Dynamic motor for adjustable motion response
3. Simple and adjustable parameter settings
4. Using integrated controller, compact structure
5. Using cross roller guide rail, high precision
6. Adopt integrated brake, safe and reliable
7. Control via PROFINET®, EtherNet/IP®, EtherCat®
8. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity |
|---|---|---|---|---|---|
| 1772163 | HEPP-42-56-PN | $857.14 | $968.57 | One-year return guarantee | |
| 1772146 | HEPP-28-30-EC-B | $514.29 | $581.15 | One-year return guarantee |
1. High-precision and high-toughness ball guide rails
2. It occupies a small space but has a large gripping force.
3. High repeatability
4. Can be used as double-acting or single-acting air claw
5. Single-acting type or with gripping force retention function, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
7. Various fixing and installation methods
8. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1772145 | DHPC-40-A-NO-S-2 | M5 | $580.39 | $655.84 | One-year return guarantee | |
| 1772032 | DHPC-6-A-S | M3 | $221.95 | $250.8 | One-year return guarantee |
1. High-precision and high-toughness ball guide rails
2. It occupies a small space but has a large gripping force.
3. High repeatability
4. Can be used as double-acting or single-acting air claw
5. Single-acting type or with gripping force retention function, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
7. Various fixing and installation methods
8. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1772031 | DHPC-L-25-A-NO-S-2 | M5 | $376.51 | $425.46 | One-year return guarantee | |
| 1771985 | DHPC-L-10-A-S | M3 | $274.80 | $310.52 | One-year return guarantee |
1. Sturdy and powerful
2. Equipped with T-slot guide rails
3. The clamp guide rail achieves dust-proof effect by sealing air
4. Powerful type available
5. Can be used as a double-acting and single-acting gripper
6. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
7. Suitable as external and internal air gripper
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770398 | HGPT-80-A-B-G2 | G1/4 | $1202.49 | $1358.81 | One-year return guarantee | |
| 1770351 | HGPT-16-A-B | M5 | $355.89 | $402.16 | One-year return guarantee |
1. The clamping clamp guide rail has the highest accuracy
2. Various fixing and installation methods and wide range of applications, so flexibility is high
3. Can be used as a double-acting and single-acting gripper
4. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
5. Suitable as external and internal air gripper
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770350 | HGPP-32-A-G2 | M5 | $979.11 | $1106.39 | One-year return guarantee | |
| 1770333 | HGPP-10-A | M3 | $489.81 | $553.49 | One-year return guarantee |
1. Micro holder: compact and lightweight structure
2. Due to the externally adjustable air claw fingers, it can grasp in all directions
3. Single-action gripper, optional normally open (NO) or normally closed (NC) jaws
4. Adopt clamping flange, flange mounting parts, and Z-stroke compensation fixation methods
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770332 | HGPM-12-EZ-G9 | M3 | $245.01 | $276.86 | One-year return guarantee | |
| 1770321 | HGPM-08-EO-G6 | M3 | $245.01 | $276.86 | One-year return guarantee |
1. Optimized structural space, high force and torque
2. Reliable, precise and centered grabbing
3. Long stroke: the guide rail length of the clamp is very long
4. The opening stroke can be set to optimize the time
5. Double-action gripper with two pistons running in parallel and opposite directions
6. Suitable as external and internal air gripper
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770320 | HGPL-63-60-A-B | G1/8 | $2534.25 | $2863.7 | One-year return guarantee | |
| 1770305 | HGPL-14-20-A-B | M5 | $754.32 | $852.38 | One-year return guarantee |
1. Completely sealed, so suitable for very harsh environments
2. Able to grasp accurately despite large torque load
3. At the optimal structure size/grabbing force ratio, the gripping force is the largest
4. 8 specifications with total stroke less than 40 mm
5. Can be used as a double-acting and single-acting gripper
6. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
7. Suitable for external and internal crawling
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770304 | HGPD-80-A-G1 | G1/4 | $1967.49 | $2223.26 | One-year return guarantee | |
| 1770281 | HGPD-16-A | M5 | $616.56 | $696.71 | One-year return guarantee |
1. Best: Compact and flat design
2. Durable: integrated guide rails and sturdy design
3. Economical and affordable: excellent price/performance ratio
4. Can be combined: There are a variety of specifications and strokes to choose from
5. Use less material, achieve sustainable production, and require no maintenance during the entire service life.
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770044 | HPPF-20-80-A | M5 | $462.22 | $522.31 | One-year return guarantee | |
| 1770021 | HPPF-8-8-A | M3 | $269.67 | $304.73 | One-year return guarantee |
1. High load-bearing capacity and precise air gripper chuck T-slot guide rail
2. It occupies a small space but has a large gripping force.
3. Maximum repeatability
4. Can be used as a double-acting and single-acting gripper
5. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
7. Various adaptation methods on the drive
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770020 | DHPS-35-A-NO | G1/8 | $484.42 | $547.39 | One-year return guarantee | |
| 1770005 | DHPS-6-A | M3 | $172.58 | $195.02 | One-year return guarantee |
1. The gripper jaws have guide rails and have high torsion resistance.
2. Compact and sturdy structure
3. Suitable for grabbing larger parts
4. Double-acting piston actuator
5. Suitable for external and internal crawling
6. Installation: direct fastening through threads, with through holes
7. For position sensing using proximity sensors using T-shaped slots and circular slots
8. Achieve sustainable production by reducing the use of materials
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1770004 | DHPL-40-200-P-A | G1/8 | $763.97 | $863.29 | One-year return guarantee | |
| 1769993 | DHPL-10-20-P-A | M5 | $263.78 | $298.07 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |||
|---|---|---|---|---|---|---|---|---|
| 1769423 | AEVUZ-100-25-P-A | G1/4 | M12 | M20x1.5 | $300.86 | $339.97 | One-year return guarantee | |
| 1769338 | AEVUZ-12-10-A-P-A | M5 | M3 | M6 | $70.11 | $79.22 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |||
|---|---|---|---|---|---|---|---|---|
| 1769337 | AEVULQ-100-25-A-P-A | G1/4 | M12 | M20x1.5 | $257.31 | $290.76 | One-year return guarantee | |
| 1769256 | AEVULQ-16-5-P-A | M5 | M4 | M6 | $61.03 | $68.96 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |||
|---|---|---|---|---|---|---|---|---|
| 1769255 | AEVU-100-25-P-A | G1/4 | M12 | M20x1.5 | $258.17 | $291.73 | One-year return guarantee | |
| 1769170 | AEVU-12-10-A-P-A | M5 | M3 | M6 | $59.66 | $67.42 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |||
|---|---|---|---|---|---|---|---|---|
| 1769169 | ADVULQ-100-80-P-A | G1/4 | M12 | M20x1.5 | $370.63 | $418.81 | One-year return guarantee | |
| 1768998 | ADVULQ-12-10-A-P-A | M5 | M3 | M6 | $73.03 | $82.52 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |||
|---|---|---|---|---|---|---|---|---|
| 1768997 | ADVU-125-80-P-A | G1/4 | M16 | M27x2 | $418.97 | $473.44 | One-year return guarantee | |
| 1768802 | ADVU-12-10-A-P-A | M5 | M3 | M6 | $54.51 | $61.6 | One-year return guarantee |
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1763056 | DGPL-40-500-PPV-A-B-KF | G1/4 | $1881.82 | $2126.46 | One-year return guarantee | |
| 1763045 | DGPL-25-1000-PPV-A-B-KF | G1/8 | $1614.23 | $1824.08 | One-year return guarantee |
1. The piston rod prevents rotation through the guide rod and connecting plate
2. Sliding guide rail
3. Optional double-outlet piston rod
4. Used for position detection
Click on the order code to learn more about each product number
| Order code | Product Code | Reference standard price (excluding tax) | Reference standard price (including tax) | Estimated delivery | Quantity | |
|---|---|---|---|---|---|---|
| 1762777 | ADVUL-100-80-P-A | G1/4 | $447.65 | $505.84 | One-year return guarantee | |
| 1762769 | ADVUL-100-10-P-A | G1/4 | $365.55 | $413.07 | One-year return guarantee |
1. Sturdy and precise movement device with extremely high torque resistance and long service life
2. Reliable gripping through precisely ground sliding guides
3. Sliding guide rail
4. The opening angle of each gripper finger can be freely adjusted up to 90°, thus optimizing cycle time
5. Can be used as a double-acting and single-acting gripper
6. Single acting type or with gripping force support, normally closed (NC)
7. Suitable for external and internal crawling
8. Various adaptation methods on the drive
1. High torque capacity due to the side support of the air gripper chuck
2. Self-centering type
3. Internal fixed throttling
4. Maximum repeatability
5. Sliding guide rail
6. Can be used as a double-acting and single-acting gripper
7. Single acting type or with gripping support, normally closed (NC)
8. Various adaptation methods on the drive
1. High torque capacity due to the side support of the air gripper chuck
2. Can be used as double-acting or single-acting air claw
3. Single-acting type with gripping force support, normally open (NO)
4. Suitable for external and internal crawling
5. Various adaptation methods on the drive
6. Achieve sustainable production by reducing the use of materials
1. Grab parts with undefined positions and shapes
2. Shape adaptive capture of products with different geometric shapes
3. Shape adaptive grabbing, with suction cup effect
4. Gently grab fragile products of various sizes
5. The RA1 derivative has a robot interface and can be quickly integrated into a lightweight robot environment.
1. Grab 11 specifications with diameters from 8 to 85 mm
2. Movement direction: bellows upward or downward
3. Different bellows materials: EPDM or silicone
4. Side air connection including middle hole, or from the center above
5. Optimize process flow and improve quality: avoid scratches on workpieces
6. Additional security: can be sensed by proximity sensor or sensor
7. Used to gently grab precision workpieces from inside
1. Synchronous movement of clamps
2. The clamp guide rail achieves dust-proof effect by sealing air
3. Powerful version available
4. Equipped with T-slot guide rails
5. Can be used as a double-acting and single-acting gripper
6. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
7. Suitable as external and internal air gripper
1. Precise gripping with central motion despite large torque load
2. Completely sealed, so suitable for very harsh environments
3. 5 specifications with stroke/chuck less than 12 mm
4. Can be used as a double-acting and single-acting gripper
5. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
1. High load-bearing capacity and precise air gripper chuck T-slot guide rail
2. It occupies a small space but has a large gripping force.
3. Maximum repeatability
4. Can be used as a double-acting and single-acting gripper
5. Single acting type or with gripping force support, normally closed (NC)
6. Suitable for external and internal crawling
7. Various adaptation methods on the drive
1. Micro holder: compact and lightweight structure
2. Due to the externally adjustable air claw fingers, it can grasp in all directions
3. Single-action gripper, optional normally open (NO) or normally closed (NC) jaws
4. Suitable for external and internal crawling
5. Adopt clamping flange, flange mounting parts, and Z-stroke compensation fixation methods
1. High torque capacity due to the side support of the air gripper chuck
2. Maximum repeatability
3. Can be used as double-acting or single-acting air gripper
4. Single-acting type with gripping force support, normally open (NO)
5. Suitable for external and internal crawling
6. Various adaptation methods on the drive
7. Achieve sustainable production by reducing the use of materials
1. High torque capacity due to the side support of the air gripper chuck
2. Maximum repeatability
3. Can be used as double-acting or single-acting air gripper
4. Single-acting type with gripping force support, normally open (NO)
5. Suitable for external and internal crawling
6. Various adaptation methods on the drive
7. Achieve sustainable production by reducing the use of materials
1. High performance and flexible
2. Dynamic motor for adjustable motion response
3. Simple and adjustable parameter settings
4. Using integrated controller, compact structure
5. Using cross roller guide rail, high precision
6. Adopt integrated brake, safe and reliable
7. Control via PROFINET®, EtherNet/IP®, EtherCat®
8. Achieve sustainable production by reducing the use of materials
1. High-precision and high-toughness ball guide rails
2. It occupies a small space but has a large gripping force.
3. High repeatability
4. Can be used as double-acting or single-acting air claw
5. Single-acting type or with gripping force retention function, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
7. Various fixing and installation methods
8. Achieve sustainable production by reducing the use of materials
1. High-precision and high-toughness ball guide rails
2. It occupies a small space but has a large gripping force.
3. High repeatability
4. Can be used as double-acting or single-acting air claw
5. Single-acting type or with gripping force retention function, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
7. Various fixing and installation methods
8. Achieve sustainable production by reducing the use of materials
1. Sturdy and powerful
2. Equipped with T-slot guide rails
3. The clamp guide rail achieves dust-proof effect by sealing air
4. Powerful type available
5. Can be used as a double-acting and single-acting gripper
6. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
7. Suitable as external and internal air gripper
1. The clamping clamp guide rail has the highest accuracy
2. Various fixing and installation methods and wide range of applications, so flexibility is high
3. Can be used as a double-acting and single-acting gripper
4. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
5. Suitable as external and internal air gripper
1. Micro holder: compact and lightweight structure
2. Due to the externally adjustable air claw fingers, it can grasp in all directions
3. Single-action gripper, optional normally open (NO) or normally closed (NC) jaws
4. Adopt clamping flange, flange mounting parts, and Z-stroke compensation fixation methods
1. Optimized structural space, high force and torque
2. Reliable, precise and centered grabbing
3. Long stroke: the guide rail length of the clamp is very long
4. The opening stroke can be set to optimize the time
5. Double-action gripper with two pistons running in parallel and opposite directions
6. Suitable as external and internal air gripper
1. Completely sealed, so suitable for very harsh environments
2. Able to grasp accurately despite large torque load
3. At the optimal structure size/grabbing force ratio, the gripping force is the largest
4. 8 specifications with total stroke less than 40 mm
5. Can be used as a double-acting and single-acting gripper
6. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
7. Suitable for external and internal crawling
1. Best: Compact and flat design
2. Durable: integrated guide rails and sturdy design
3. Economical and affordable: excellent price/performance ratio
4. Can be combined: There are a variety of specifications and strokes to choose from
5. Use less material, achieve sustainable production, and require no maintenance during the entire service life.
1. High load-bearing capacity and precise air gripper chuck T-slot guide rail
2. It occupies a small space but has a large gripping force.
3. Maximum repeatability
4. Can be used as a double-acting and single-acting gripper
5. Single-acting type or with gripping force support, normally open (NO) or normally closed (NC)
6. Suitable for external and internal crawling
7. Various adaptation methods on the drive
1. The gripper jaws have guide rails and have high torsion resistance.
2. Compact and sturdy structure
3. Suitable for grabbing larger parts
4. Double-acting piston actuator
5. Suitable for external and internal crawling
6. Installation: direct fastening through threads, with through holes
7. For position sensing using proximity sensors using T-shaped slots and circular slots
8. Achieve sustainable production by reducing the use of materials
1. The piston rod prevents rotation through the guide rod and connecting plate
2. Sliding guide rail
3. Optional double-outlet piston rod
4. Used for position detection
Product knowledge
- What about FESTO and SMC?
- What about Airtac and FESTO?
- Working principle of festo solenoid valve, interpretation of festo solenoid valve model
- How to choose pneumatic components "pneumatic hoses, cylinders, pneumatic pipe joints, pneumatic reversing valves"
- Transient characteristics of the cylinder, speed characteristics of the cylinder
- Models and types of SMC cylinders, basic structure diagram of SMC cylinders
- What brand is the schunk cylinder? Germany's schunk cylinder model type and structure
- univer cylinder model specifications, univer cylinder types
- Which country does Univer cylinder come from? What brand does Univer cylinder come from?
- Complete collection of small cylinder models, small cylinder model specifications table
- emc cylinder selection process, detailed explanation of emc cylinder TBC model
- Which country's brand is the emc cylinder? Where is the emc cylinder produced?
- Cylinder throttle valve installation method, cylinder speed regulating valve (one-way throttle valve) installation precautions
- Working principle of cylinder throttle valve, characteristics and selection of cylinder throttle valve
- The difference between cylinder exhaust throttle valve and intake throttle valve
- What is a stroke-adjustable cylinder, SMC stroke-adjustable cylinder model
- How many degrees can the high temperature resistant cylinder withstand? What is the maximum temperature resistant cylinder can withstand?
- Cylinder classification, cylinder classification number
- Cylinder types and principles, how to choose cylinder type
- Cylinder types and characteristics, cylinder types and sizes
WhatsApp: +8615857777578