Two-position five-way solenoid valve

The two-position five-way solenoid valve is a basic automation component used to control fluids and is an actuator;it is not limited to hydraulic and pneumatic. Solenoid valves are used to control the direction of hydraulic flow. Factory mechanical devices are generally controlled by hydraulic cylinders, so solenoid valves are used. The working principle of the solenoid valve. There is a closed cavity in the solenoid valve. There are through holes at different positions. Each hole leads to a different oil pipe. There is a valve in the middle of the cavity and two electromagnets on both sides. Which side is the magnet coil? When the valve body is energized, it will be attracted to which side, and the movement of the valve body is controlled to block or leak out different oil drain holes. The oil inlet hole is normally open, and the hydraulic oil will enter different oil drain pipes and then pass through The pressure of the oil pushes the piston of the oil cylinder, the piston drives the piston rod, and the piston rod drives the mechanical device to move. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.