Why the solenoid valve of a natural gas stove cannot be turned on? What are the symptoms of a broken solenoid valve of a natural gas stove?

Natural gas stove electromagnetic The reason why the valve cannot be opened

1. There is a foreign object blocking the cause The solenoid valvedoes not work properly. This is the most common situation in which the solenoid valve fails to work.

2. The galvanic coupler of the natural gas stove is oxidized or The cable outlet has a virtual connection.

3. Battery problem, battery power is low, battery Insufficient force will result in insufficient pulse ignition force. The magnetic pole will not attract, and the gas will not be able to enter.

4. The solenoid valve of the natural gas stove cannot automatically turn off the flame. , or the wiring gasket in the valve body cannot be energized normally, causing the solenoid valve of the natural gas stove to not work.

Solution ：

Find a thinner wire to clean the blockage. After cleaning, you can use it normally.

Replace a galvanic couple and check if it is There really is a virtual connection. If there is one, try it again and make sure it is connected properly this time to avoid this problem happening again.

Not used for a long time or used for a long time The battery must be replaced.

You can ask professional maintenance personnel to repair or replace one New valve body. After replacing the solenoid valve, you can use strong soapy water to check whether there is air leakage.

Issues involving natural gas stoves are relatively sensitive Yes, after all, problems in this area basically pose great safety risks, so during daily use, natural gas stoves must be properly maintained and cleaned or replaced in time.

1. When the solenoid valve of the natural gas stove is broken, it will not be very stable when we use it. It will go out as soon as we let go, or it will not turn on directly.

2. What is the quality of the solenoid valve of a natural gas stove? It can be judged by the burning condition of the flame. When everyone turns the switch quickly and clearly, and the size of the flame is clear, it means that the solenoid valve is not broken. If the ignition is unstable, it will go out as soon as it is released.

3. If we use a natural gas stove electromagnetic If the valve is broken and needs to be replaced, then you need to remove the ignition components. If you remove the switch, you will expose the copper pipe. Next to it is Solenoid Valve, in There are three screws on it, just unscrew it, then we can remove the two connecting lines on the solenoid valve and replace it with a new valve.

The above isThe reason why the solenoid valve of the natural gas stove cannot be opened, what are the symptoms of the solenoid valve of the natural gas stove being brokenContent introduction, if you want to know more relevant information, please log in to www.diancifa.cc to view the Dianwei Pneumatic.