Asco solenoid valve installation method, asco solenoid valve installation direction instructions

asco solenoid valve Installation method, asco solenoid valve installation direction instructions

When using the asco solenoid valve, the correct installation method and installation direction will also affect theSolenoid valve has a certain impact on its working efficiency and service life. The installation method and installation direction of asco solenoid valve are as follows:

1. Preparation before installation

2. Before installation, The pipes and interior of the solenoid valve need to be cleaned to ensure the cleanliness of the working environment.

2. Installation direction

Ordinary models require installation perpendicular to horizontal pipes. Also note that there are arrows on the valve body to indicate the direction of the medium flow.

3. Installation of supporting devices

For example, the filter, filter screen and pipeline in front of the valve need to be equipped with a trap. For example, in order to ensure that the asco solenoid valve can be easily repaired when it fails, a bypass device needs to be installed.

4. Installation environment

1. Ordinary models cannot be installed in working environments with explosion risks

2. Try to keep the working environment clean and particle-free

3. There should be no water in the working environment to avoid corrosion on the outside of the asco solenoid valve caused by long-term work in a humid environment.

4. The installation should ensure that the surrounding The environment has a certain amount of space to facilitate operations during maintenance.

5. Pipe installation precautions

1. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. And it needs to be powered on several times to make it suitable for temperature before it can be officially put into use.

2. Rigidity in the pipeline If insufficient, it is recommended to fix the pipe in front of the valve with a bracket to avoid vibration caused by the solenoid valve during operation.

3. In the piping system , the The diameter of the solenoid valve should be smaller than the diameter of the main pipeline valve.

4. Asco solenoid valve front and rear A pressure gauge needs to be installed on the pipeline to observe the pipeline pressure.

Above It is asco solenoid valve installation method, asco solenoid valve installation direction instructions content introduction , if you want to know more relevant information, please log in to www.diancifa.cc to view the Dianwei Pneumatic.