Working principle of vickers solenoid valve, how to use vickers solenoid valve

vickers solenoid valve How it works

When each vickers solenoid valve is in the neutral position, the control oil passage of the unloading valve runs through each vickersSolenoid valve and connected with the fuel tank. During unloading, most of the oil is unloaded, the passage is short, and the pressure loss is low. When any valve changes direction, the control oil channel is cut off, and the oil from the source enters the actuator from the solenoid valve, and its working pressure is controlled by the pilot valve. At this time, the system pressure is the pilot valve adjustment pressure. This unloading method, even if the number of solenoid valve circuits increases, only the control oil passage increases, the unloading pressure does not increase much, and the unloading pressure is always maintained at a low level. This unloading method is versatile. For manual reversing valve, unloading is reliable.

The main valve of vickers solenoid valve (also a safety valve) can be divided into three categories: three-stage concentric, two-stage concentric and slide valve type according to different matching forms. Among them, the slide valve structure has low working pressure and low control pressure accuracy;although the three-stage concentric structure is mature and widely used, compared with the two-stage concentric type, it is not as sensitive as the two-stage concentric type. When the specifications and strokes are the same, the two-stage concentric structure The oil flow capacity of the two-stage concentric structure is much greater than that of the three-stage concentric structure;the two-stage concentric structure has stable control pressure and good processing technology. The two-stage concentric structure has broad application prospects. Here, the two-stage concentric structure is used to discuss its structural size design method.

How to use vickers solenoid valve

Pilot from vickers solenoid valve The oil controls the movement of the main reversing valve spool, allowing the oil from the working pump to enter the boom cylinder to achieve the rise of the boom. The greater the output pressure of the proportional pilot pressure reducing valve, the greater the displacement of the main reversing valve spool, the greater the flow rate through the main reversing valve, and the faster the boom rises. When the operating handle is pulled to the extreme position, the limit electromagnet in the handle is energized, and the handle is attracted at the extreme position. Solenoid valveThe boom rises at the maximum speed. When it rises to the position limited by the upper limit switch of the boom, the operating handle limit solenoid When the power is cut off, the handle automatically returns to the neutral position, and the boom can remain at the defined position. During the raising process of the boom, if the boom needs to stay at a certain position, the operating handle needs to be returned to the neutral position.

vickers solenoid valves are mainly used as actuators in electro-hydraulic servo systems (see hydraulic servo systems). In the servo system, compared with electrical and pneumatic actuators, hydraulic actuators have the characteristics of good speed, large output power per unit weight, smooth transmission, and strong anti-interference ability. On the other hand, electrical components are often used in servo systems to transmit signals and correct characteristics. Therefore, modern high-performance servo systems also use electro-hydraulic methods, and servo valves are essential components of such systems.

The above isWorking principle of vickers solenoid valve, how to use vickers solenoid valve Content introduction, want to know more For more related information, please log in to www.diancifa.cc to view the Shenwei Pneumatic.