How to open the natural gas solenoid valve, how to reset the natural gas solenoid valve

Natural gas solenoid valve How to open

How to open a natural gas solenoid valve? Directly turn the valve core of the solenoid valve open and then convert the valve to a vertical angle. The solenoid valve opens. Under normal circumstances, the valve is open if it is in a 90-degree position. It is a type of safety device and plays an important safety precaution role in natural gas pipelines. At the same time, the device also has a suction button. When danger occurs and an alarm is issued, this button can directly turn off the air source to prevent explosion accidents. After the alarm is cleared, you can use it normally by pulling down the extension handle.

For natural gas solenoid valves, it is composed of coils, push rods and magnets, etc., and uses coils and current to generate magnetism. It can automatically isolate natural gas to avoid natural gas poisoning when there is no open flame burning. In the event of an open flame burning, it can directly cut off the gas source to avoid an explosion.

How to reset the natural gas solenoid valve

The reset operation of natural gas solenoid valve is divided into three categories according to the use environment. The first is the long-term For natural gas solenoid valves on transportation pipelines, because the overall pipeline system is long, this type of natural gas solenoid valve generally has a remote master control switch. The natural gas solenoid valve can be reset through the master control. Of course, it can also be reset manually on site. .

The second is the natural gas solenoid valve on the urban pipeline system. This type of valve is generally in use and does not need to be reset. However, because the valve sometimes issues an alarm reminder, if you want to reset it, you need to eliminate the alarm reminder first.

Then there is the natural gas solenoid valve used in the courtyard, that is, in the home. This type of natural gas solenoid valve generally has its operating position exposed, and only needs a handle to reset it. Of course, some larger natural gas solenoid valves require a wrench.

Simple summary:

The solenoid valve on the long-distance pipeline can be reset on the main control or manually on site.

The solenoid valves on the city pipelines must be eliminated first Manually reset after alarming.

Solenoid valve can be reset manually directly.

Operating position on the electrovalve body that can be manually operated , generally use a wrench or special handle.

The above isHow to open the natural gas solenoid valve and how to reset the natural gas solenoid valve Content introduction, want to know more For more related information, please log in to www.diancifa.cc to view the Shenwei Pneumatic.