How to remove the solenoid valve core, the relationship between the solenoid valve core and the solenoid coil

Solenoid valve How to remove the core

The solenoid valve core is also a relatively common product. When disassembling the solenoid valve core, you must first prepare to disassemble itSolenoid valve Valve core tool, then unscrew the screws fixed on it with a screwdriver, and then remove the solenoid valve core. If you want to know more about the solenoid valve For the specific core disassembly steps, you can search online, and there are more detailed introductions online.

Many electrical appliances in the home will have more or less failures if they are not operated properly or if they are not used with care. The solenoid valve core in the gas water heater is a component that is prone to failure. When it fails, it must be disassembled. To disassemble, you need to cut off the power first, and then slowly rotate the valve core of the gas water heater out. If you do not have professional skills, it is best to find after-sales service to solve the problem.

The solenoid valve also has a valve core. If the solenoid valve core is damaged, then we must remove it and replace it with a new solenoid valve core. When disassembling the solenoid valve core, we must first Prepare the tools for removing the solenoid valve core, prepare a hexagonal wrench, and then use the hexagonal wrench plate to unscrew the screws that fix the solenoid valve core, and then you can remove the solenoid valve core.

The relationship between the solenoid valve core and the solenoid coil

The solenoid valve is composed of a solenoid coil It is composed of a magnetic core and a valve body containing one or several holes. When the coil is energized or de-energized, the operation of the magnetic core will cause the fluid to pass through the valve body or be cut off to achieve the purpose of changing the direction of the fluid. The electromagnetic components of the solenoid valve are composed of fixed iron core, moving iron core, coil and other components;the valve body part is composed of slide valve core, slide valve sleeve, spring base, etc.

If the solenoid valve does not move after being powered on, especially the solenoid valve that has been used for a long time and is opened frequently, you will encounter a similar situation. The matching gap between the slide valve sleeve and the valve core of the solenoid valve is very small (less than 0.008mm). It is usually assembled in a single piece. When mechanical impurities are introduced or there is too little lubricating oil, it is easy to get stuck. The treatment method can be to insert a steel wire through the small hole in the head to make it bounce back. The fundamental solution is to Solenoid valve Remove, take out the valve core and valve core sleeve, clean it with CCI4 so that the valve core is in the valve sleeve Flexible movements.

The above isHow to remove the solenoid valve core, the relationship between the solenoid valve core and the solenoid coil Content introduction, If you want to know more relevant information, please log in to www.diancifa.cc.