Asco explosion-proof solenoid valve wiring method instructions

asco explosion-proof electromagnetic Valve wiring method instructions

ASCO explosion-proof solenoid valve generally requires two power cords to work. Many users have bought three wires (three ports) on the function, so the wiring method of the explosion-proof solenoid valve is How did you get it?

1. Wiring method for lead-type explosion-proof solenoid valve:

What is a lead-type explosion-proof solenoid valve? The lead-type means that a power cord is drawn from the inside of the explosion-proof coil housing. The length of the lead is generally 1.5 meters. The left and right and part of the outlet wires can be lengthened before leaving the factory, so the lead-type explosion-proofSolenoid valve How to wire the wire? The lead type is a three-core wire: the three-core wire is divided into Yellow, red, (green/black/blue) color (yellow is the ground wire, red wire and green/black/blue are the power wire) power supplies are not divided into positive and negative poles.

2. Wiring method for terminal block type explosion-proof solenoid valve:

ASCO explosion-proof solenoid valve wiring seat type means that there are three ports inside the explosion-proof coil housing. The ports are divided into two power cords and one ground wire. The wiring seat type on-site wiring Standard wires can be directly introduced into the explosion-proof coil housing.

The above isAsco explosion-proof solenoid valve wiring method instructions Content introduction, if you want to know more related information, you can Log in to www.diancifa.cc to view.