Two-way solenoid valve The difference between it and the one-way solenoid valve
The one-way solenoid valve only has an electromagnet on one end, and the two-way solenoid valve has two ends. Bit. The simple difference can be understood this way, one coil for one-way and two coils for two-way.
Working principle of two-way solenoid valve
Normally closed: The two-way solenoid valve is usually closed;when the coil is energized, Solenoid valve opens. After the power is cut off, the solenoid valve closes. When the solenoid valve is in the open state, the inlet pressure is greater than the outlet pressure! The medium flows from the inlet end to the outlet end;
< span style="font-size: 16px;color: rgb(0, 0, 0);">When the outlet pressure is greater than the inlet pressure, the medium flows from the outlet end to the inlet end. And regardless of whether the medium pressure is the inlet end is greater than the outlet end, or the outlet end is greater than the inlet end, the solenoid valve can cut off the medium after the power is turned off.
Features of two-way solenoid valve
1. The valve is sealed with a stainless steel piston to completely eliminate leakage;
2. Within the operating pressure range Inside, the valve does not distinguish between inlet and outlet, that is, the inlet can be used as an outlet, and the outlet can be used as an import.
3. The coil adopts a custom-made high-power coil to ensure the rapid opening and closing of the two-way solenoid valve;
4. Special processing inside 304 stainless steel spring allows the medium to be completely closed when flowing from the outlet to the inlet;
5. The valve adopts a direct-acting structure to meet the working conditions of very low pressure.
The above isThe difference between two-way solenoid valve and one-way solenoid valve, two-way The working principle of the solenoid valveContent introduction. If you want to know more related information, please log in to Sunway Pneumatic www.diancifa.cc.