emc cylinder selection process, detailed explanation of emc cylinder TBC model

emc cylinder selection process





Select the cylinder type from the action method








Selection of cylinder








Procedure 1 How to select the cylinder bore size
■ First, please confirm the following three conditions of use:
1. Determine the relevant load weight: The load includes the weight of the workpiece, fixture, guide rod and other movable parts.
2. Select the air pressure used: the compressed air pressure supplying the cylinder.
3. Action direction: Determine the cylinder action direction (up, down, horizontal)
According to the above usage conditions, compare the cylinder output force conversion table below to select the appropriate cylinder size.






Note: Load rate | is the ratio of the axial load force on the cylinder piston rod to the theoretical output force of the cylinder. The selection of load ratio | is related to the operating state of the cylinder.
For static load (such as clamping, low-speed riveting, etc.), | ≤70%
For horizontal or vertical actions in the range of cylinder speed in the range of 50 ～ 500mm/s, | ≤50%
For cylinder speeds above 500mm/s to the maximum allowable movement speed of the cylinder, | ≤30%

Procedure 2 How to select cylinder stroke
■ Determine the moving distance of the workpiece
The standard stroke of each series can be known from the stroke table. The minimum standard stroke that exceeds the moving distance of the workpiece is selected as the cylinder stroke.

Example: Moving distance 95mm
Cylinder stroke 100mm (standard stroke)



Procedure 3 Select cylinder series
■ Select the appropriate series from the table below based on the purpose of use and the cylinder diameter and stroke.


Cylinder series bore table








Procedure 4 Select installation method
Different series have different installation forms, and each series also has a variety of installation forms to choose from. The installation form should be selected according to the different uses of the cylinder.



Procedure 5 Select buffer format
According to the needs of the application, select the buffer form of the cylinder.






Procedure 6 Select sensor switch
The sensor switch installed on the magnetic cylinder is mainly used to detect the position of the cylinder piston.






Procedure 7 Select cylinder connection accessories
According to the needs of mechanical design, select the accessories at the piston rod end, such as I joint, Y joint, floating joint, etc.







Detailed explanation of emc cylinder TBC model






TBC series standard cylinder, bore range 32~160mm. The front and rear cover molds of the cylinder have been redesigned. The dust ring of the cylinder front cover has been changed from the old ORA structure (NBR material) to the EU structure (TPU material). It is the same as the VBC cylinder, which eliminates the dust leakage of the front cover. The material Changed from NBR to TPU, which is more wear-resistant, better dust-proof and has longer life;adopts a stronger bronze self-lubricating shaft