The function of pulse dust collector cylinder
The purpose of the cylinder on the pulse bag dust collector, the general standard dust removal pneumatic cylinder can be applied to all walks of life , but specially used for dust removal equipmentCylinderWhen used, it is generally used together with a poppet valve and an electromagnetic pulse valve. Different cylinder diameters can be customized according to the specific requirements of customers and different needs, as well as stroke cylinders, cylinder flanges, and cylinder matching single ears. Binary ears, as well as cylinder standard air rods and cylinder extended air rods and other accessories.
The compressed air enters the air source treatment component through the electromagnetic pulse valve, and then undergoes water separation, filtration, pressure reduction, and lubricating oil treatment. When it has a certain The dry, clean and lubricated air under pressure will enter the cylinder through the electromagnetic pulse valve, and the cylinder will start to function.
Normal operating conditions of pulse bag dust collector cylinder: working medium and ambient temperature are usually -5~70℃, Its working pressure is 0.1~1Mpa, and the movement speed range of the cylinder is 50~500mm/S. It uses solenoid valve K25JD to 25 series two-position five-way cut-off directional valve, which can be divided into five-port two-position/five-port three-position series. Specifications, usually according to the requirements of the project, the appropriate diameter, voltage, connecting thread, and installation form should be selectedSolenoid valve, it can also be selected according to the actual use.
Dust collector cylinder installation picture
Schematic diagram of bag dust collector cylinder installation. The bag dust collector cylinder lift valve uses the pressure of compressed air to open or close. It is mainly used to open or close the air inlet of this chamber, use the pulse valve to blow gas, and clean the filter bag. In the bag dust collector, the opening and closing of the bag dust collector poppet valve is controlled by dust cleaning or filtration. When the bag dust collector is filtering and removing dust normally, the cylinder is open;when cleaning dust, the cylinder poppet valve is closed and the bag is cut off. The passage of room smoke to the air outlet.
The compressed air enters the air source treatment component. After water separation, filtration, pressure reduction, and lubricating oil treatment, the dust removal cylinder has a certain pressure and is dry and clean. , lubricated air enters the dust removal cylinder through the solenoid valve. The solenoid valve receives signals from the electric control cabinet, controls the action of the dust removal cylinder, and realizes automated processes such as cold air, ash unloading, offline ash cleaning, and back-blowing air conversion.
Depending on the structure of the dust collector, there are many types of offline valves. Common ones include rotary offline valves and lifting valves. Posted offline. Both types of offline valves are driven by a cylinder to move the valve plate to open and cut off the air path. The action of the offline valve cooperates with the pulse valve to form online and offline cleaning of dust removal. Most of the offline valves in engineering are vertically installed poppet valves. This kind of offline valve is based on CylinderIt telescopically lifts and presses down the sealing valve plate to realize the offline function. It has a simple structure, reliable action and is very convenient.
The above isThe role of pulse dust collector cylinder, dust collector cylinder installation picturesContent introduction, want to know more Relevant information can be viewed at www.diancifa.cc.
WhatsApp: +8615857777578