Two-axis cylinder characteristics
1. Implement JIS standards.
2. High non-rotation accuracy, suitable for precise guidance.
3. The extended support guide has good guiding performance.
4. There are mounting holes on three sides of the fixed plate to facilitate multi-position loading.
5. It has certain bending and torsion resistance and can withstand certain lateral loads.
6. Except for the axial direction, there are mounting holes on all other sides of the body, providing customers with a variety of installation and fixing methods.
7. There are two sets of inlet and exhaust ports on both sides of the cylinder for actual needs.
8. The front anti-collision pad of the body can be adjustedCylinder stroke and alleviate the impact.
9. The standard configuration of this series of cylinders is magnetic type, and all types without magnet are optional.
Dual-axis cylinder installation and use
1. When the load changes during work, a cylinder with sufficient output power should be selected.
2. Under high temperature or corrosive conditions, corresponding high temperature or corrosion resistant cylinders should be selected.
3. In situations with high humidity, dust, or water droplets, oil dust, or welding slag, the cylinder should take corresponding protective measures.
4. Before the cylinder is connected to the pipeline, dirt in the pipeline must be removed to prevent debris from entering the cylinder.
5. The medium used in the cylinder should be filtered by a filter element of more than 40Um before use.
6. Because the cylinder front cover and piston are both short, the general stroke cannot be selected too large.
7. In low-temperature environments, anti-freeze measures should be taken to prevent the water in the system from freezing.
8. The cylinder should avoid lateral loads as much as possible during operation to maintain Double axis< /span>Cylinder normal operation and service life.
9. When the cylinder is removed and will not be used for a long time, attention should be paid to surface rust prevention. Dust-proof blocking caps should be added to the inlet and exhaust ports. Due to the product The manufacturing and guiding precision is high, please do not disassemble the cylinder fixing block or cylinder head by yourself.
Two-axis cylinderNotes
1. In an environment with corrosive gases, chemicals (such as organic solvents), sea water, water and water vapor Or when used in places where the above substances are attached, it can be used with conditions. The seals, valve bodies, etc. that are in contact with the medium need to be changed to special materials.
2. Avoid use in places with explosive gases.
3. Do not use it in situations with vibration and impact, or the vibration and impact resistance of various pneumatic components must comply with the requirements of the product sample.
4. Do not use it in places where there are heat sources around or are affected by radiant heat, or take measures to block radiant heat.
The above isTwo-axis cylinder Characteristics, installation, use and precautions of dual-axis cylinderContent introduction, if you want to know more related information, please log in to Sunway Pneumaticwww View .diancifa.cc.
WhatsApp: +8615857777578