How to use the parallel rodless cylinder? The parallel rodless cylinder must be properly handled before use. First, we need to check whether the cylinder is damaged. Before the bolt connection Whether there is any looseness in the place, this will greatly reduce the installation trouble. During the installation process, the piston rod of the cylinder cannot be overloaded with external forces, nor can it be deviated in direction, and must be consistent with the axis of the piston.
What to pay attention to in parallel rodless cylinder
1. Keep a distance between parallel cylinders
The distance between two parallel cylinders should be greater than 40mm, otherwise the magnetic switches of the two cylinders will interfere with each other and cause malfunction.
2. Keep the magnetic switch wiring as short as possible
The length of the parallel cylinder wiring has no effect on the functional use, but if the wiring is too long, the current will be very large when the switch is turned on, shortening the service life of the switch. If the wiring is very long, more than 5 meters, use a contact protection box.
3. Precautions for use in special environments
a. In strong magnetic environments, switch cylinders with strong magnetic field resistance should be used;
b. In situations where there is a lot of dust, water droplets or oil droplets, a telescopic protective sleeve should be used on the cylinder rod side;
c. If there is iron powder and iron filings nearby, if not protected, the magnet will attract the iron powder and iron filings to gather around it, causingThe magnetic force in the cylinder weakens, It may cause the auto switch to not operate.
4. Note - the shaft of the single-axis cylinder will rotate
Unless it is an anti-rotation single-axis cylinder, the shaft of the single-axis cylinder will rotate during movement, which may cause the bolt connection of the piston rod head to loosen.
The above isParallel rodless How to use the cylinder and precautionsContent introduction, if you want to know more related information, please log in to Sunway Pneumaticwww.diancifa.cc Check.
WhatsApp: +8615857777578