▋Installation and use of three-axis cylinder
1. When the load changes during work, a cylinder with sufficient output power should be selected;
2. Under high temperature or corrosive conditions, corresponding high temperature or corrosion resistant cylinders should be selected;
3. In places with high humidity, dust, or water droplets, oil dust, or welding slag, the cylinder should take corresponding protective measures;
4. Before the cylinder is connected to the pipeline, dirt must be piped to prevent debris from entering the cylinder;
5. The medium used in the cylinder should be filtered through a filter element of more than 40um before use;
6. The lateral load on the cylinder during operation should not exceed the allowable value to maintain the normal operation and service life of the cylinder;
7. In low-temperature environments, anti-freeze measures should be taken to prevent the water in the system from freezing;
8. When the cylinder is removed and not used for a long time, attention should be paid to surface rust prevention. Dust-proof blocking caps should be added to the inlet and exhaust ports. Due to the high precision of product manufacturing and guidance, please do not Remove the cylinder fixing block or cylinder head yourself.
▋How to adjust the stroke of a three-axis cylinder
1. Installing a sleeve on the cylinder shaft can reduce the stroke. New stroke = original stroke - length of sleeve.
2. Some cylinders have internal magnetism, and a set of magnetic switches are installed outside to control the solenoid valve and stroke.
3. Install the stroke switch, control the solenoid valve, and adjust the stroke at will.
4. Use mechanical lever mechanism to change the stroke.
The above isThe installation and use of three-axis cylinders, how to adjust the stroke of three-axis cylindersIntroduction to related content. If you want to know more information, please log in to www.diancifa.cc to view it.
WhatsApp: +8615857777578