Cylinder There will be problems and failures during the application process. Common failures There will be air leakage in the cylinder, and there are many reasons for air leakage in the cylinder. The following content is compiled by the editor of Shenwei Pneumatics on several causes of air leakage in the cylinder and how to eliminate them.
1. Several causes of cylinder air leakage
1. The piston rod is installed eccentrically or has scratches;
2. Insufficient lubricating oil supply and poor cylinder lubrication;
3. There are impurities between the piston rod and the seal;
4. There are impurities, aging, damage, etc. in the seals;
5. The threads of the four-tie-rod nut-type connection are loose.
2. How to eliminate cylinder air leakage
1. Reinstall and adjust, and retighten the connection between the cylinder block and the cylinder head
2. Check whether the oil mist device is malfunctioning
3. Clean and remove impurities
4. Repair or replace the piston rod
5. Replace seals
The above are the causes and troubleshooting methods of air leakage in the Shenwei pneumatic cleaning cylinder. If you have other questions about the cylinder, some of our technicians can contact you.< span style="font-size:16px;">Divine Pneumatic as a commitmentCylinder is produced by an old manufacturer with perfect after-sales service and only for customer satisfaction. During the purchasing process, there are still unclear points or needs. For specific data, we have technical personnel who can call the free technical consultation hotline 15857777578.
WhatsApp: +8615857777578