Thin cylinder function
Converts the pressure energy of compressed air into mechanical energy, and the driving mechanism performs linear reciprocating motion, swinging and rotating motion. A thin cylinder is a cylindrical metal that guides the piston in linear reciprocating motion Mechanical parts. The thin cylinder takes up less space, has a lightweight structure, beautiful appearance, and can withstand large lateral loads. It can be directly installed on various fixtures and special equipment without installing accessories.
Thin cylinder< strong>Features
The main features of the thin cylinder are short axial size, short stroke, compact appearance and large output force. Therefore, it is suitable for occasions with small space and is used in manipulators and various clamping devices. It is widely used in China, Thin cylinderhas a compact structure , light weight, small space occupation and other advantages.
Structure of thin cylinder: It consists of cylinder barrel, end cover, piston, Composed of piston rod and seal.
How to install and use thin cylinder
1. Before installation, the thin cylinder should undergo no-load test operation and pressure test at 1.5 times the maximum working pressure. It can be used after normal operation and no air leakage.
2. Before the thin cylinder is connected to the pipeline, the dirt in the pipeline must be cleared to prevent debris from entering the cylinder.
3. When the load changes during the stroke, you should use a cylinder, and additional buffer device.
4. Before starting the operation of the buffer cylinder, first screw the buffer throttle valve to the smaller position of the two throttles, and then gradually open it larger until it is adjusted to a satisfactory level. Buffering effect.
5. Do not use the full stroke, especially when the piston rod is extended, use the piston rod to collide with the cylinder head. Otherwise, it is easy to cause load concentration at the piston rod and external connection.
WhatsApp: +8615857777578