Answers to some questions about the cylinder and how to judge whether it is in place?

Cylinder There are many common questions related to this product, so it is impossible to explain them all at once. , can only be carried out step by step, and this is also helpful for us to master its content, so today is no exception. I am still here to answer questions, so that everyone can continue to progress and expand in this area, so that you can understand more, so as to Learning goals can be achieved as early as possible.


Question 1: What are the related factors of cylinder speed increase?

The speed increase of the cylinder is mainly related to the flow rate, load rate, etc.



Question 2: How to determine whether the cylinder gasket is damaged?

Whether the cylinder gasket is damaged mainly depends on whether there is air leakage in the cylinder, especially at the joint between the cylinder head and the base body. If there is any, it means there is damage.



Question 3: How to judge whether the cylinder is in place?

The position of the cylinder is generally achieved by a sensor. When the cylinder is in position, the sensor should be able to output an in-position signal under normal circumstances. The sensor usually uses a magnetic switch, but some other switching sensors such as proximity switches or photoelectric switches can also be used. However, sometimes, if there are no strict restrictions on the cylinder response speed, it can also be judged by time.