There are three main shortcomings of airtac pneumatic components:

The shortcomings of airtac pneumatic components are mainly in three aspects

Airtac We have already understood the various advantages of pneumatic components. Since everything has two sides, what are the shortcomings of pneumatic components? Do the advantages of pneumatic components outweigh the disadvantages, or do the disadvantages outweigh the advantages? Dingyu pneumatic components professionals provide detailed analysis.
Speaking of the shortcomings of pneumatic components, they can be summarized into three aspects: First, the compressibility of air makes the cylinder's operating speed susceptible to changes in load. However, this defect can be overcome by using gas-liquid linkage. Secondly, when the cylinder moves at low speed, the low-speed stability of the cylinder is not as good as that of the hydraulic cylinder because friction accounts for a larger proportion of thrust. Third, although the output force of the cylinder can meet the work requirements in many applications, its output force is smaller than that of the hydraulic cylinder.
Although pneumatic components have the above shortcomings, the above three shortcomings are not unsolvable. Technical personnel from the pneumatic component factory pointed out that as long as appropriate methods are used, it can be avoided. Pneumatic technology is a professional technology that uses compressed air as a medium to drive and control machinery. It has the advantages of energy saving, no pollution, high efficiency, low cost, safety and reliability, and simple structure. It is widely used in various machinery and production lines. In the past, pneumatic systems and their components on production lines such as automobiles and tractors were designed, manufactured and maintained by each factory. Therefore, overall, pneumatic components have more advantages than disadvantages. This is one of the important factors in the continued prosperity of the pneumatic components market.