Selection and use requirements of Airtac air source treatment parts

Selection and usage requirements of YATAC gas source treatment parts

Selection and use requirements of YATACO gas source processing parts Usage requirements:

a. Select the air assembly required for the system based on technical performance parameters such as pipeline diameter, flow size, pressure regulation and filtration accuracy;

b. Air There are seven types of filter precision: 2um, 5um, 10um, 20um, 40um, 70um, and 100um. Appropriate products can be selected according to the air quality requirements;

c. When using the pressure reducing valve, try to Avoid using the lower limit of the pressure regulating range, and select an appropriate pressure reducing valve according to the operating pressure requirements;

d. Installation sequence: starting from the inflow end of the air source, connect the air filter and pressure reducing valve at one time For valves and lubricators, the direction of the arrow on the component housing is the direction of air flow and cannot be connected in reverse;

e. The air filter and lubricator must be installed vertically with the side with the cup facing down;< /div>